Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Tempe, AZ
Gate access control repair in Tempe typically costs $280-$620 for keypad or card-reader troubleshooting, and $340-$780 for video intercom or phone-entry system work, with most residential calls completed same day. Tempe’s mix of 1960s ranch-home retrofits and high-cycle ASU-area apartment gates creates failure patterns you won’t find in neighboring cities. Call (623) 323-3849 for a free estimate with a written price before any work starts.
Why Tempe Homes Are Different
Tempe’s housing stock splits into two worlds that break gates differently. South of the 60, 1960s-1980s ranch subdivisions near Rural Road and McClintock were retrofitted with block-wall perimeters and iron swing gates decades after construction; posts settled in caliche, hinges bind, and loop-detector wiring predates current code. North and east of campus, apartment complexes along Apache Boulevard between Rural Road and Price Road run slide gates 300-500 cycles daily during the ASU school year, burning motors and grinding rollers on timelines no manufacturer spec anticipates.
The Sonoran Desert adds its own schedule. Haboobs push caliche silt into bottom tracks and operator housings; failures spike 24-48 hours after July-September storms. Sustained 110°F+ summers push south- and west-facing motors past thermal duty-cycle limits, especially where no shade structure exists. No neighboring East Valley city compresses this much high-turnover, high-cycle gate stock into one footprint.
Our Main Tempe Services
Most Tempe calls fall into three categories. Here’s where to go for each.
Gate Repair in Tempe
We handle hinge binding on settled posts in south Tempe ranch neighborhoods, track seizures on Apache Boulevard apartment complexes, and silt-damaged operators after monsoon storms. Every repair gets a written price before work starts and a photo record before we leave. Gate Repair in Tempe
Gate Installation in Tempe
New installations in Tempe range from HOA-governed communities along Warner and Elliot Roads to commercial access-control retrofits near ASU. We measure, quote in writing, and schedule; no same-day installation. Gate Installation in Tempe
Gate Motor & Opener in Tempe
Tempe’s heat and high-cycle apartment gates kill motors faster than rated expectations. We service nine brands and replace only when repair is impractical, with a written price and part number documented. Gate Motor & Opener in Tempe
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in Tempe
Access control in Tempe means different problems on different sides of the city. Near ASU, aging apartment keypads and card readers handle tenant turnover rates that wear contacts and corrupt programming. In south Tempe’s older subdivisions, original loop-detector wiring fails to meet current standards, and homeowners want phone-entry or video intercom upgrades that integrate with existing motors. We document every access-control job with wiring diagrams and photographed settings under The Haven Standard. Gate Access Control covers our full capabilities.
Keypad Entry
Signs you need it
Buttons stick or fail to register, the housing seal is cracked from UV exposure, or the code works intermittently after monsoon moisture intrusion.
What it costs in Tempe
Keypad repair or replacement in Tempe runs $280-$480 for standalone units, or $420-$620 when integrated with a multi-door access system.
How we do it
We test voltage at the keypad, photograph the wiring configuration, replace or repair, then seal the housing and document the new code programming in your job record.
Video Intercom
Signs you need it
Image is pixelated or drops out, night vision fails, the call button doesn’t ring through, or the screen housing has heat-blistered after multiple 115°F days.
What it costs in Tempe
Video intercom repair in Tempe ranges $340-$580 for camera or display replacement, and $620-$980 for full system upgrades with app-based remote entry.
How we do it
We test signal path and power supply, photograph the existing mounting and cable routing, replace components, and verify night-vision function after dark before signing off.
What Gate Access Control Costs in Tempe
| Item | Typical range in Tempe |
|---|---|
| Keypad entry repair/replacement | $280 - $480 |
| Video intercom repair | $340 - $580 |
| Video intercom system upgrade | $620 - $980 |
How fast can you fix a keypad at a Tempe apartment complex?
Most keypad repairs are same-day if the issue is the unit itself; integrated system failures may need next-day parts from our Phoenix office. Call (623) 323-3849 for a free estimate.
Do you reprogram existing codes or do we need all new ones?
We preserve existing codes when possible and document any changes in your photo record; new programming is only required if the memory board has failed. Call (623) 323-3849 to schedule.
Gate Parts & Welding in Tempe
Tempe’s heat and caliche soil destroy gate hardware on schedules that surprise homeowners. Hinge pins gall in unlubricated residential swing gates south of the 60; apartment slide-gate rollers flat-spot from 500-cycle days near campus; posts lean as caliche shifts under 1980s-era footings. We replace, weld, and document every part number under The Haven Standard. Gate Parts & Welding details our full fabrication capabilities.
Hinge Replacement
Signs you need it
The gate drags at the latch side, the hinge pin squeals or has vertical play, or the gate has settled visibly off plumb.
What it costs in Tempe
Hinge replacement in Tempe runs $180-$340 for standard residential iron gates, or $380-$580 when the post itself has shifted and needs re-plumbing.
How we do it
We photograph the existing hinge placement, cut and grind the old weld, align the gate with a come-along, weld the new hinge, and document the finished position.
Gate Rollers
Signs you need it
The slide gate shudders in the track, rolls unevenly, or has flat-spotted wheels that thump at the same point every cycle.
What it costs in Tempe
Roller replacement in Tempe costs $220-$380 for standard V-groove or box-track rollers, or $420-$680 when the track itself is worn and needs section replacement.
How we do it
We block the gate, photograph roller and track condition, replace with matched-spec rollers, verify rolling torque, and document the part number installed.
What Gate Parts & Welding Costs in Tempe
| Item | Typical range in Tempe |
|---|---|
| Hinge replacement | $180 - $340 |
| Hinge + post re-plumb | $380 - $580 |
| Gate roller replacement | $220 - $380 |
Can you weld a cracked gate frame in Tempe heat?
Yes, we weld year-round using processes rated for ambient temperature; for critical structural repairs, we schedule early morning to minimize heat-affected zone issues. Call (623) 323-3849 for an estimate.
Do you stock rollers for older Tempe apartment gates?
We carry common V-groove and box-track rollers for brands including Linear, Viking, and Ghost Controls; uncommon sizes ship overnight from our Phoenix office. Call (623) 323-3849 to confirm fit.
Brands We Service in Tempe
We repair and source parts for nine automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Our Phoenix office stocks common control boards, limit switches, and gear assemblies for Linear, Viking, and Ghost Controls, with most Tempe repairs completed without waiting on parts. our brands
Pricing for Gate Repair in Tempe, AZ
| Service | Typical range in Tempe |
|---|---|
| Keypad entry repair/replacement | $280 - $480 |
| Video intercom repair | $340 - $580 |
| Video intercom system upgrade | $620 - $980 |
| Hinge replacement | $180 - $340 |
| Hinge + post re-plumb | $380 - $580 |
| Gate roller replacement | $220 - $380 |
| Roller + track section replacement | $420 - $680 |
In Tempe, prices push higher when caliche requires post excavation, when monsoon silt has seized multiple components, or when ASU-area apartment systems need after-hours access coordination. Every price is written and agreed before any work starts under Haven Standard Clause 1; you hold the quote, we hold to it.
Neighborhoods We Serve in Tempe
We dispatch to all Tempe neighborhoods from our Phoenix office, with same-day availability for most repair calls across the city.
- Downtown Tempe / ASU area
- North Tempe (Apache Boulevard corridor)
- South Tempe (Warner / Elliot Roads)
- West Tempe (McClintock to the 101)
- Maple-Ash-Farmer historic district
Service Area - Cities Near Tempe
Our crews work throughout the East Valley. We regularly cross into Mesa, AZ for residential and commercial gate repair, handle HOA installations in Chandler, AZ, service automated communities in Gilbert, AZ, and troubleshoot access-control systems in Scottsdale, AZ. Scheduling is coordinated from our Phoenix office for all locations.
Serving Tempe, AZ - Our Local Coverage Area
We’re based in the Tempe area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Tempe
Most residential gate repairs don’t require permits; new installations and structural post replacements may need Tempe building department approval, which we handle as part of our written scope when applicable. We flag permit requirements in your upfront quote so there are no surprises.
Same-day dispatch is standard for repair calls throughout Tempe; our Phoenix office coordinates crew routing to reach most neighborhoods within hours, not days. A live person answers (623) 323-3849 24/7 to schedule.
We document every repair with photos and part numbers, which satisfies most HOA maintenance committees; if your HOA requires pre-approval, we provide the written scope and specifications for their review before work starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Tempe Customers Say
"The safety loop had never been installed correctly by the previous company. They showed me the reading, fixed it, and did not charge me for the diagnosis."
- Patrick H."Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.