A Vance company - serving Tempe, AZ

Driveway Gate in Tempe, AZ

Every visit starts with

Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted

The assessment is free and the quote is the invoice.

Styles & brands we work with

Wrought iron
Wrought iron
Wood & steel frame
Wood & steel frame
Farm & ranch
Farm & ranch
Sliding driveway gates
Sliding driveway gates
LiftMaster operators
LiftMaster operators

Before & after – our own jobs

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Driveway Gate in Tempe, AZ

Driveway gate service in Tempe typically ranges from $150 for minor motor adjustments to $850 for control board replacements, with most standard repairs completed in a single visit. For a broader look at pricing, see our guide on How Much Does Gate Installation Cost? (2026 Price Guide) - Tempe, AZ. If your gate is stuck, grinding, or failing to respond to your remote, you need a technician who documents the specific mechanical fault before suggesting a part replacement. At Vance Gate Repair Tempe, we operate under The Haven Standard: we provide a written price before any work begins, we document the entire repair with photographs, and we back all our work with our 365-Day Done Right Promise. If you need immediate assistance, call us at (623) 323-3849 to speak with a live person, 24 hours a day.

Whether you are dealing with a sagging gate in an older home near the Tempe campus or a modern automated system in a newer development, the mechanical principles remain the same. Our team specializes in Gate Installation and repair, ensuring that every component-from the limit switches to the safety sensors-is calibrated correctly. We do not use guesswork. When we arrive at your property, we open the motor housing, inspect the wiring, and verify the voltage. You will receive a clear, written explanation of what we found and what it costs to fix it before we turn a single screw.

When You Need Driveway Gate Service

Residential gates in Tempe face unique stressors. The intense heat often causes lubricants to break down faster than in cooler climates, and the fine dust common in the Valley can infiltrate gearboxes and photo-eye sensors. You should contact a professional when you notice specific signs of failure. Do not attempt to adjust high-tension springs or cables yourself; these components are under extreme pressure and can cause severe injury if they snap or release unexpectedly. Always rely on a trained professional for these mechanical tasks.

  • The gate stops mid-travel: This often indicates that the limit switches have drifted or that the motor is encountering resistance. We frequently see this in Tempe when the ground shifts slightly due to irrigation, causing the gate to drag against the pavement.
  • Grinding or scraping noises: If you hear metal-on-metal sounds, the internal gears or the gate track likely require cleaning or lubrication. If left unaddressed, this will strip the gears on your Elite or LiftMaster motor, leading to a much more expensive repair.
  • The gate fails to reverse when obstructed: This is a critical safety failure. If your photo-eye (the infrared beam that stops the gate if something crosses the path) is misaligned by even an inch, the system may not detect a vehicle or a person. We align these sensors using precise voltage readings rather than visual estimation.
  • Intermittent remote response: If you find yourself having to drive right up to the gate to get it to open, the antenna or the receiver board may be failing. We test the signal strength and the integrity of the antenna wiring to determine if the issue is with your remote or the gate logic board.
  • The gate is sagging or leaning: This usually points to a hinge failure or a structural issue with the post. We assess whether the post needs to be reset or if the hinges simply need to be shimmed and re-welded.
  • The motor runs but the gate does not move: This typically signals a broken chain, a stripped gear, or a clutch that has slipped. We open the housing to identify the exact point of failure and provide a written quote for the specific part needed.

Our Driveway Gate Process

Technician using power tools to install a metal gate latch
Our Driveway Gate Process

Every service call we make is governed by the Haven Standard, which ensures you are never surprised by an invoice or an unfinished job. We treat residential driveway gates with the same level of technical documentation that Adrian Vance utilized during his years in commercial access control. This is how we handle your service:

  1. Initial Assessment and Documentation: Upon arrival, our technician inspects the entire system. We take photographs of the current settings, the wiring, and the physical state of the gate. This photo record is shared with you so you can see exactly what we are looking at.
  2. Written Scope and Pricing: Before we begin any work, we write down the exact price for the repair. You will know exactly what the cost is, including parts and labor. We do not provide verbal estimates that change once the work is finished.
  3. Technical Execution: We perform the repair using manufacturer-approved procedures. Whether we are working on a Mighty Mule swing gate or a FAAC sliding gate, we follow the specific wiring and calibration requirements for that model.
  4. Final Verification: Once the repair is complete, we test the gate through multiple cycles. We verify that the safety sensors are functioning, the gate closes fully, and the motor is operating within the manufacturer’s specified voltage range.
  5. The Haven Standard Handover: We provide you with a final record of the work performed, including the photos of the completed job. This documentation ensures that if you ever need service in the future, the next technician knows exactly what was done previously.
BeforeBefore
AfterAfter

Driveway Gate Pricing in Tempe

We believe in transparency. You should never have to guess what a repair will cost. While every gate system is unique, the following table provides a clear view of our standard pricing ranges for common driveway gate issues in the Tempe area. These prices are estimates; an exact written quote is provided after we inspect your specific motor and gate configuration.

Service Item Typical Price Range
Basic Motor Adjustment & Calibration $150 - $275
Photo-Eye Sensor Alignment or Replacement $180 - $350
Control Board/Logic Board Replacement $450 - $850+
Hinge Repair or Welding $200 - $400
Chain or Belt Drive Repair $250 - $450

If you have received a written estimate from another company, we offer a free second opinion. Bring the paperwork to us, and we will review it at no cost to ensure you are getting a fair assessment. Our goal is to fix your gate, not to sell you a replacement you do not need. Call (623) 323-3849 to schedule your service or to ask about a specific part for your gate system.

FAQs - Driveway Gate

Professional technician using an angle grinder to repair a metal gate
FAQs - Driveway Gate

Is it cheaper to repair or replace my driveway gate motor?

In most cases, repair is significantly more cost-effective than a full replacement. We find that many motors are replaced prematurely because the previous technician did not know how to diagnose a simple control board or limit switch failure. We will always attempt a repair first, provided the motor housing and internal gears are sound. Call (623) 323-3849 for an honest assessment of your current system.

Can you fix my gate today?

We operate 24 hours a day, seven days a week, and we prioritize getting your gate back to working order as quickly as possible. When you call us, you speak directly to a person who can schedule a technician to arrive at your property. We do not use voicemail loops or callback queues, so you get answers immediately.

Do you service my specific brand of gate motor?

We are experts in nine major automation brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Because we understand the specific wiring diagrams and logic boards for these manufacturers, we can service almost any system currently installed on a residential property in Tempe. If you are unsure about your brand, look for the sticker on the motor housing or call us, and we can help you identify it.

What does the 365-Day Done Right Promise cover?

Our 365-Day Done Right Promise means that if the repair we performed fails within one year, we will come back and make it right at no additional charge. We stand by our work because we document every step, ensure the calibration is perfect before we leave, and use only quality parts. This is our commitment to Gate Installation and repair standards that go beyond the industry norm.

Written by Adrian Vance, Owner at Vance Gate Repair Tempe, serving Tempe.

Need Gate Repair help in Tempe? Licensed & insured · same-day response · free estimates
Call (623) 323-3849
Local Service Coverage

Request a Free Estimate in Tempe

Tell us what you need - Vance Gate Repair Tempe responds fast. No obligation.

When you send us your details, you acknowledge our Privacy Policy and authorize us to contact you by phone, text, or email concerning your request, including by the partner businesses that may perform the service.

Prefer to text? Text Now
Call Now - 24/7 Dispatch